Get ready to customise your IKEA FLISAT dollhouse into a one-of-a-kind play space—whether it’s a cozy horse stable, a bustling town house, or a heroic fire station, this guide will take you through each step to make your vision a reality!
Step 1: Apply stickers to the left and right inside walls
Find stickers marked 1 & 2 for the left and right inside walls. Align with corners as indicated by arrows in the reference image.
Starting from the top corner, slowly press the sticker downwards, smoothing it into place as you go to prevent air bubbles.
Step 2: Apply sticker to the bottom floor back walls
Find sticker marked 3 for the top floor back wall. Align carefully with the bottom corner edges and press firmly into place.
Step 3: Apply sticker to the top floor back walls
Find sticker marked 4 for the top floor back wall. Align carefully with the top corner edges and press firmly into place.
Step 4: Apply stickers to the bottom floor middle wall
Find stickers marked 5 & 6 for the bottom middle back wall. Align carefully and press firmly into place.
Step 5: Apply stickers to the floors
Find stickers marked 7, 8 & 9 for the top and bottom floors. Align as indicated by arrows and press firmly into place.
Step 6: Apply sticker to the attic back wall
Find sticker marked 10 for the attic back wall. Align as indicated by the arrow and press firmly into place.
Step 7: Assemble the dollhouse and apply outside wall stickers
You’ve successfully applied all the inside wall stickers! Now, assemble the house (excluding the roof). If needed, make small holes in the stickers for nails or wooden knobs to fit through.
Next, find the stickers 11 & 12 for the outside walls and apply them carefully.
Step 8: Assemble the roof and apply stickers
Assemble the roof of the dollhouse. Then, find stickers 13 & 14 and apply them to the roof surfaces.